Product overview
WD-G30P three-in-one industrial-grade wireless Gateway/AP/Client is designed for indoor and outdoor industrial wireless communication. Suitable for different industrial applications, especially in field communication system erection plays an irreplaceable role; Support Mesh network architecture, no need to lay network cables in the middle, seamless connection, save excess AC.
Its equipment installation is convenient, wall installation and lifting and holding pole installation; Can adopt wide temperature operation, IP68 protection grade and self-powered mode, built-in power supply can work for 10 hours. At present, it has been widely used in railway, mining, airport, subway, coal mine, outdoor telekinetic training and field work and many other sites.
Features
IEEE802.11a/b/g/n/ac independent dual-channel RF module with the highest wireless rate up to 11n MIMO 300Mpbs + 11ac MIMO 867Mbps;
1* gigabit network port;
Supports Gateway, AP, and Client modes.
Support AP, point-to-point, point-to-multipoint bridge working mode;
Support to form MESH network;
It supports universal Spanning Tree protocol (STP) and Fast Spanning Tree protocol (RSTP).
Support for wireless client speed limit management;
Support QoS based on WMM standard;
DHCP server is supported.
Supports MAC address list control and filtering.
Malicious AP detection;
It has the function of enabling and controlling SSID broadcast.
Device software restart, hardware reset;
Can be connected with a variety of high gain antenna, so that high transmission quality signals cover a larger range, transmission longer distance, or in the electromagnetic environment with large interference;
High and low temperature stability is remarkable, can be used in a variety of extreme climate conditions around the world;
Suitable for a variety of power supply modes, a wide range of applications support DC 9-36V/DC 18-75V two power supply modes;
With power supply, it can work for 10 hours
Built-in high power WIFI PA, maximum transmission power 26dbm;
External dual-frequency 5Dbi high-gain antenna;
Support WIFI WPS;
Support extended antenna, external standard SMA interface;
Built-in WDT watchdog to ensure the normal operation of the system;
Support 7*24 hours 24/7 work;
Network self-grouping and self-healing;
Maintain high bandwidth after multiple hops;
Supports a variety of advanced security policies.
Use 802.11ac wave2, MU-MIMO, beamforming, and multiple antennas
Product parameter
|
Model |
WD-G30P |
|
Interface |
1*10/100/1000Base-TX self-adoption RJ45 port，1*DC Power charging interface,
2*SMAAntenna interface ，1*ON/OFF 口 |
|
LED display |
PLC、ETH |
|
Protocal（PHY） |
IEEE802.3，IEEE802.3x, IEEE802.3u IEEE802.11a/b/g/n/ac |
|
WiFi rate |
2.4G: 300Mbps 5.8G:867Mbps |
|
Management |
802.1D Ethernet Bridge |
|
802.1Q VLAN |
|
Quality of Service(QoS) |
|
Operating voltage range |
DC 9-36V/DC 18-75V |
|
Power supply mode |
External power supply/internal power supply |
|
Working temperature |
-40℃—85℃ |
|
Size |
212×132×92mm |
|
Operating invironment |
Operating humidity :10%-85% non-condensable Storage humidity: 5%-90% non-condensable |
|
Rated power of supply |
15-20W |
|
Certification |
FCC、CE class B,WEEE,RoHS |
Typical product application
Learn more
